Use este identificador para citar ou linkar para este item: https://repositorio.inpa.gov.br/handle/1/5020
Título: Avaliação de susceptibilidade e impacto de incêndio em floresta alagável (igapó) e terra-firme na Amazônia central por meio de lidar terrestre portátil
Título(s) alternativo(s): Susceptibility and fire damage on a flooded forest (igapo) and upland forest in the Central Amazon accessed with portable ground lidar
Autor: Almeida, Danilo Roberti Alves de
Orientador: Nelson, Bruce Walker
Coorientador: Schietti, Juliana
Palavras-chave: Índice de área foliar
Incêndios florestais
Sensoriamento remoto
Laser de varredura.
Abertura de dossel
Data do documento: 4-Fev-2015
Editor: Instituto Nacional de Pesquisas da Amazônia - INPA
Programa: Ciências de Florestas Tropicais - CFT
Abstract: Nutrient-poor and seasonally flooded Amazon forests have suffered high impacts from forest fires. During the dry periods, seasonally flooded forests can present higher air temperature and lower humidity compared to upland forests, enabling the occurrence and spread of fire. These microclimatic conditions may be related to structural attributes of the forest (canopy gap fraction, height and density of understory) that favor changing the microclimate. A high densityof vegetation in the understory (with wet vegetation) can control the spread of fire and the forest canopy height and opening can control the stability of the microclimate inside the forest.The aim of this study was to evaluate these attributes to determine susceptibility and impacts of fires in these forests. To estimate these forest structure attributes we used a portable active remote sensing system equipped with LiDAR RIEGL LD90-3100VHS-FLP. The operation of the data collection in the field is quick and easy, compared to other systems that also use LiDAR device. Forest structural attributes, such as the leaf area density (LAD) along the vertical profile of the forest were extracted from two-dimensional clouds of first and last returns at 2000 Hz. The pulse emitted by the equipment, with a wavelength of 900 nm (near infrared spectrum)is strongly reflected by leaves. The instrument was mounted on a gimbal to maintain a zenith shot angle and it was carried 1m above the ground. Ten transects of 250m length were, sampled at constant speed for each situation: (1) unburned flooded forest (2) burned flooded forest (3) unburned upland forest and (4) burned upland forest. The flooded forest showed a more damage after fire, with loss of 71% of this vegetation, and also it was more susceptible to fire occurrence due to the higher gap fraction (at least two times higher than the upland increasing the entry of sunlight). Canopy height was 15%lower (what makes flooded forests more vulnerable to the external environment) and the density of the understory, 43%lower (less living moist vegetation to limit the spread of fire). The flooded forest are extremely fragile to fires, being more susceptible to occur, with higher post fire damage and lower regeneration, which is hard by flooding period.
Resumo: As florestas sazonalmente alagáveis por águas pretas e pobres em nutrientes (igapó) têm sofrido altos impactos por incêndios florestais. Durante os períodos secos estas florestas apresentam menores extremos de umidade relativa do ar e maioresextremos de temperatura comparada com a terra-firme, favorecendo a proliferação do fogo. Estas características microclimáticas podem ser controladas por atributos estruturais da floresta (abertura de dossel, altura da floresta e densidade de sub-bosque). O sub-bosque mais denso (com vegetação úmida) controla a proliferação do fogo. A altura da floresta e a abertura de dossel controlam a estabilidade do microclima no interior da floresta. O objetivo do estudo foi avaliar estes três atributos (densidade de sub-bosque, altura da floresta e abertura de dossel) como determinantesda susceptibilidade aos incêndios florestais e os impactos pós-fogo nessas florestas. Foi utilizadoum sistema portátil de sensoriamento remoto ativo equipado com LiDAR RIEGL LD90-3100VHS-FLP para estimar os atributos. A coleta dos dados em campo é rápida e fácil, comparada com outros sistemas que também utilizam o LiDAR. Os atributos das florestas são extraídos de nuvens bidimensionais com primeiros e últimos retornos (2000Hz), onde pode ser estimado por exemplo a densidade de área foliar (LAD) ao longo do perfil vertical da floresta. O pulso emitido pelo equipamento, com comprimento de onda de 900nm (espectro infravermelho próximo) é fortemente refletido pelas folhas. O instrumento é montado em um gimbal mantido na orientação do zênite e é carregado à um metro acima do solo. Dez transectos de 250 m foram percorridos em velocidade constante para cada situação: (1) igapó não queimado, (2) igapó queimado, (3) terra-firme não queimada e (4) terra-firme queimada. O igapó apresentou maiores danos pós-fogo, com perda de 71% de sua vegetação, e também maior susceptibilidade à ocorrência de incêndios devido a abertura de dossel, duas vezes maior que a terra-firme (aumentando a iluminação solar), altura da floresta 15% mais baixa (maior vulnerabilidade de alteração do microclima) e 43% menos vegetação no sub-bosque (menos vegetação úmida que dificulta a proliferação do fogo). As florestas de igapó são fitofisionomias extremamente frágeis aos incêndios, sendo mais susceptíveis à ocorrência de incêndios, com maiores danos pós fogo e menor regeneração, que é dificuldade pelo período de alagamento.
Aparece nas coleções:Mestrado - CFT

Arquivos associados a este item:
Arquivo Descrição TamanhoFormato 
Danilo_Almeida.pdf2,14 MBAdobe PDFThumbnail
Visualizar/Abrir


Este item está licenciada sob uma Licença Creative Commons Creative Commons